763-428-3094 |
||
|
||
|
Home >
Facilities DMI is fully equipped with the latest
state-of-the-art equipment.
Equipment
1)
Haas HL-2BB 1)
Haas SL 20 2)
Fadal 4020HT-VMC With 21 Tool,
Automatic Tool Changer Thru Spindle Coolant, Rigid Tap. Travel 40"X
20"Y 28"Z 1)
Fadal 4020HT-VMC With 21 Tool,
Automatic Tool Changer Thru Spindle Coolant, Rigid Tap. Travel 40"X
20"Y 20"Z 3)
Series 2 Bridgeport Milling Machines with power feed and digital readouts
With Power DrawBars 1)
Jet Lathe Model GH-1660ZX, 3-1/8 diameter thru spindle with digital readout 1)
Hardinge Chucker Model HCT 1)
Boyar Schultz surface grinder with 6" x 12" magnetic chuck. 1)
1997 Doall Vertical Band Saw model 2013, 20"
throat, 13" work height with 45 degree tilt table 1)
1997 Doall Band Saw model C-916M 10¾” Dia
Capacity 1)
Doall 10" Power Chop Saw 1)
Delta 12" disk sander 3)
Misc Drill Presses 1)
8 Ton Dennison Hydraulic MultiPress 12" Stroke 1)
50 Ton Hydraulic Press 3)
Arbor Presses (1, 2, and 3 ton) 1)
Srd Drill Bit Grinder 8)
Tapping Heads 3)
Horizontal Chamfering Machines 2)
Indexing Heads (with 5-C Collets and 3 Jaw Chucks) 1)
Inspection
Equipment 1)
Starrett Surface Plate (24 x 36) 1)
Doall 12" Height Gage 6)
Dial Bore Gages (.400”-10.00”) 1)
Starrett ID Groove Gage 1)
Meyer Gage Pin Set (.011-.750 by .001) 1)
Full Set of Standard and Metric Thread Gages 2)
Fowler Gage Block Sets 1)
0"-16” OD Micrometers 1)
0"-4" OD Thread Micrometers 1)
Misc Calipers- Micrometers Shop
Support 1)
9000
Sq Ft Facility 1)
Nissan 5000 Lb Propane Fork Lift 130" Mast 1)
Pallet Jack 1)
Sullivan Palatek Screw Type Air Compressor 1)
Trinco Sand Blaster 1)
1)
50 Gal Kleerflo Cleanmaster
Parts Washer 1)
Vibratory Parts Tumbler 1)
2004 3/4 Ton Delivery Truck 1)
2015 3/4 Ton Delivery Truck 763-428-3094
Home | Facilities | Contact
|
|
|||
Dahlheimer
Machining, Inc • Phone:
763-428-3094 • Fax: 763-428-3095 |
|||||
|
|
|